Calibration Procedure for the ControlAir Type 500 Electro-Pneumatic I/P Transducer

In this video you will learn how to calibrate a ControlAir Type 500 I/P transducer.

The ControlAir Type 500X converts a current or voltage input signal to a linearly proportional pneumatic output pressure. This versatile instrument provides a high degree of reliability and repeatability at an economical cost.

The Type 500X is available in two different versions. The lower range model is for standard process control applications, which typically utilize a 3 to 15 PSIG (0.2 to 1 bar) output. The extended range unit provides up to 145 PSIG (10 bar) output for higher pressure industrial pneumatic and process control system requirements.

For more information, contact Advance Instruments. Call them now at (888) 388-6446 or visit their website at https://advanceinstruments.com.

White Paper: The Ins and Outs of I/P Transducers

Overall, I/P’s are relatively simple devices, but there are numerous factors to consider before selecting one. The information that follows should provide you with a complete understanding of the factors involved in making the correct product selection, installation, and maintenance. When chosen, installed, and maintained correctly, I/P’s should provide many years of reliable service.

Table of Contents

• Principle of Operation
• Electrical Considerations
• Pneumatic Requirements
• Accuracy
• Calibration
• Mounting Options
• Media
• Safety Ratings
• Troubleshooting

---

DOWNLOAD THE 7 PAGE WHITE PAPER FROM

THE ADVANCE INSTRUMENTS WEBSITE HERE

---

For more information, contact Advance Instruments by calling (888) 388-6446 or by visiting their website at https://advanceinstruments.com.